Masculine birthday

My card base on this card is 6.5 x 5. The black mat is 6.25 x 4.75. The mustache paper is 6 x 4.5. The black border is 6.25 x 2. I used birthday bash for the font on page 65 at 3.5 inches. Super simple.
I am entering this to the following challenge:
Brown Sugar Ch #44 Masculine birthday

Welcome

This was a quick and simple shape card made with Wild card 2. There are many shape cards on this cartridge. I cut the base in black at fit to page which came out to 5.75 inches. I cut all the other parts the same size. I'm not sure if it will fit in my 6.5 x 5 envelopes or not but next time I will probably cut it at 5 inches.
I am entering this to the following challenges:
My Craft Spot Ch #99 Welcome to the neighborhood
Die Cuttin Divas Ch #117 Shape card
Simon Says Anything Goes

Smile

This butterfly came from create a critter at 3 inches. My card base is 6.5 x 5. The green mat is 6.25 x 4.75. The butterfly paper is 6 x 4.5. The green border is 6.25 x 1. I stamped smile on a label punch.
I am entering this to the following challenge:
Celebrate the Occasion Ch #114

The zoo

This card was made with everyday paper dolls and zoo balloo cartridges. The animals were cut from zoo balloo at 2 inches. The gate is from everyday paper dolls at 3.5. The grass is also from everyday paper dolls at 6 inches fit to length. The sun was in my scraps. I popped it u. My card base is 6.5 x 5.  The cloud paper is 6.25 x 4.75. Since the animals were so small the eyes did not show up so I used a black pen to add them.
I am entering this to the following challenge:
BBTB2 Zoo animal challenge

Memorial day dog

This dog came from create a critter 2 at 3.5 inches. I put a goggle eye on him. My card base is 6.5 x 5. The red mat is 6.25 x 4.75. The star mat is 6 x 4.5. I added ribbon and tied a knot.
I am entering this to the following challenge:
Fantabulous Cricut Challenge Blog Ch #162 Memorial Day

Birthday Fairy

This card was made with A child's year at 3.25 inches. I put pink stickles on the wings and the present. My card base is 6.5 x 5. The black mat is 6.25 x 4.75. The next mat is 6 x 4.5.   The black border is 4.75 x 1.5. I added ribbon and tied a knot. I then added buttons. The sentiment came fro Cardz TV "Make a wish" stamp set.
I am entering this to the following challenges:
Go Fish Ch #41 Glitter
RCS #38
Challenges 4 Everybody Ch#21 Anything goes

Father's day car

This car was made from best images of 2010, also on Nifty fifties. I cut it at 3 inches.  The card base is 6.5 x 5. The black mat is 6.25 x. 4.75. The patterned mat is 6 x 4.5. I put buttons on the headlights and fog lights. I then stamped it from studio G stamp set. I popped up the car.
I am entering this to the following challenges:
Brown Sugar Ch #43-Fathers day
HIMCR #99 Fathers day
My Sheri Crafts Ch #111 Fathers day

Tourist

This card was made with Teddy bear parade at 3.25 inches along with all his parts. My card base is 6.5 x 5. Thw brown mat is 6.25 x 4.75. The stripped mat is 6 x 4.5. The brown border is 45 x 1.5. The inside mat is 4.25 x 1.25. I used Cardz TV "fun in the sun" stamp set for my sentiment. I added two brown buttons.
I am entering this to the following challenge:
Simon Says Stamp Challenge Take a picture

Don't be crabby

This card came from life is a beach cartridge. The crab is cut at 3 inches. I gave him goggle eyes and put him on an action wobble. The starfish were cut at 2 inches. My card base is 6.5 x 5. The brown mat is 6.25 x 4.75. The sand paper is 6 x 4.5. I stamped it with cardz TV "Fun in the sun" stamp set.
I am entering this to the following challenge:
Action Wobble Ch #55

BBQ

This card was made with Simply charmed cartridge. The hamburger was cut at 2.75 with all his parts. I ran the top bun through the cuttlebug on the swiss dots folder. I ran the lettuce with the swirls folder. I inked both buns and ran some ink across the swiss dots. The drink was cut at 3 inches. I used Life is a beach for the lettering and put on purple stickles. My card base is 6.5 x 5. The purple mat is 6.25 x 4.75. The checked mat is 6 x 4.5.
I am entering this to the following challenge:
Scrappy Moms Terrific Tuesday

Your so tweet

This card was made with create a critter 2. The bird was cut at 4.5 inches. My card base is 6.5 x 5. The blue mat is 6.25 x 4.75. The patterned mat is 6 x 4.5. The blue border is 4.5 x 1.5. I wrapped twine around it, tied in a bow and added a button. I then stamped it with Cardz TV "For the birds" stamp set.
I am entering this to the following challenge:
My Craft Spot Ch #98 

Friends

This card was made with a child's year at 3.25 along with the shadow. My card base is 6.5 x 5. The black mat is 6.25 x 4.75. The patterned mat is 6 x 4.5. The pink border is 6 x. 1.5. I added ribbon and bow to the border. I added black buttons to the side. I then stamed it with friends stamp.
I am entering this to the following challenge:
Twisted Tuesday 2TC50

Smile

This cow came from create a critter at 3.5 inches. I have him popped up. The mat for the sentiment was also from create a critter on the same page at 1 inch. The grass came from everyday paper dolls at 6.25 fit to length. The flowers I used my flower punch the put buttons in the middle. My card base is 6.5 x 5. The cloud paper is 6.25 x 4.75
I will be giving this to a friend who is going through some tough times.
I am entering this to the following challenge:
BBTB2 Pass it on

Enjoy the bike ride

This card was made with Just because cartridge at 6.5 inches. The card base is 6.5 x 5. The pink mat is 6.25 x 4.75. The patterned paper is 6 x 4.5.  I used elegant edges for the sentiment mat at 2 inches.
I am entering this to the following challenge:
Die Cuttin Divas Ch #116 Going for a bike ride

Memorial day

This was an easy quick card. My white card base is 6.5 x5. The red and white polka dot paper is 6.25 x 4.75. The blue mat is 5.25 x 3.75. I used the cuttlebug on the blue mat with the stars folder. The image is from a child's year at 3.5 inches.
I am entering this to the following challenge:
Celebrate the Occasion Ch #113

Baby

This card was made with Everyday paper dolls at 4 inches. I used peachy keen stamps for her face. I used pink chalk for her cheeks and her pajamas. My card base is 6.5 x 5. The purple mat is 6.25 x 4.75. The patterned mat is 6 x 4.5. The purple border is 6.25 x 1.5. I added ribbon. I added 3 buttons to the top
I am entering this to the following challenges:
Fantabulous Cricut Challenge Blog Ch #161 Oh Baby
Paper Playtime Ch #10 Buttons or Brads

The beach

This card was made with life is a beach and create a critter. The dolphin is from life is a beach at 2 inches. The sun came from create a critter. My card base is 6.5 x 5. The cloud paper is 6.25 x 4.75. The water is 6.25 x 4. The sand is 6.25 x 3. I used my special scissors to cut the top of the water. The chair, seagull, visor, and beach bag are all stickers. I then used Cardz TV "Make a wish" stamp set for my sentiment.
I am entering this to the following challenge:
Exploring Cricut "Here comes summer"

Party

I made this card with Life is a beach at 3.5 inches. I had to cut the layers 4 times to get the different colors. I used chalk on the drink. I put buttons in the 4 corners. My card base is 6.5 x 5. The orange mat is 6.25 x 4.75. The patterned mat is 6 x 4.5.
I am entering this to the following challenge:
Brown Sugar Ch #42

Rainbow

This card was made with Noah's ABC's at 3 inches. The sun came from create a critter at 1.5. My card base is 6.5 x 5. The cloud paper is 6.25 x 4.75. The grass is 6.25 x 2.
I am entering this to to the following challenge:
Die Cuttin Divas Ch #115 Over the rainbow

Happy birthbear

This card was made with Teddy bear parade at 3.25 inches. My card base is 6.5 x 5. The patterned paper is 6 x 4.5. I added tiles in the corners. I used white and yellow stickles on the bow in her hair and the pom poms. I stamped happy birthday from Cardz TV "make a wish" stamp set.
I am entering this to the following challenge:
Pause Dream Enjoy Ch #10

Flowers

This card was made from Spring Cottage at 3.25 inches. My card base is 6.5 x 5. The green mat is 6.25 x 4.75. The patterned mat is 6 x 4.5. The border is 4.75 x 1.5. I added ribbon and tied a knot. I then put on two buttons. I then stamped the sentiment.
I am entering to the following challenges:
BBTB2  Flowers challenge
Celebrate the occasion Ch #112
Simon Says Flower power

Sympathy

The only cricut cut in this card is the sentiment mat. I used elegant edges at 3 inches for that and the shadow. The card base is 6.5 x 5. The purple mat is 6.25 x 4.75. The patterned mat is 6 x 4.5. The piece in the middle is 6 x 2.5. I put a purple ribbon down the middle. I embossed that piece with my cuttlebug. I tied a piece of ribbon and added that to the top. I put gems on the sentiment mat. I stamped the sentiment with paper studio stamp set.
I am entering this to the following challenge:
Challenges 4 Everybody Ch #20

Graduate bear

This card was made with Teddy bear parade at 3.25 inches. The card base is 6.5 x 5. The yellow mat is 6.25 x 4.75. The patterned mat is 6 x 4.5. I used my label punch for the sentiment.
I am entering this to the following challenges:
Fantabulous Challenge blog Ch #160
My Craft Spot Ch #97

Baby bear 2

This card was made with the teddy bear parade cartridge at 3.25 inches I added a gem to her hat. I added ribbon near the bottom. I stamped with Cardz TV "Beary Sweet"  stamp set. My card base is 6.5 x 5. The green layer is 6.25 x 4.75. The top green layer is 6 x 4.5.
I am entering this to the following challenge:
RCS #36

My work space

This is my work space  This is where all my cards are made  http://www.craftindesertdivas.com/2013/05/craft-it-up-link-it-up-party-6.html
I am entering this o the following blog:
Craftin Desert Divas

Doggone it

I made this card with create a critter and create a critter 2 cricut cartridges. The scroll came from create a critter 2 at 8.25 inches. The dog came from create a critter at 2.5 inches. I added a green pearl to his collar and glossy accents to his eyes, ears and mouth. My card base is 6.5 x 5. The brown mat is 6.25 x 4.75. The patterned paper is 6.25 x 3.5. The sentiment came from My craft spot "Thank you" stamp set.
I am entering this to the following challenge:
Die Cuttin Divas Ch #144 A sketch

Party bear

This bear was made from Teddy bear parade.  Love this cartridge. The bear and all her parts were cut at 3.25 inches. The white card base is 6.5 x 5. The gray mat is 6.25 x 4.75. The stripped mat is 6 x 4.5. The gray border is 6.25 x 1.5. The stripped border is 6 x 1. I stamped it with Cardz TV "Make a wish" stamps. I added gems to the bear's headpiece. I used glossy accents to her eyes and nose

Make a wish

This card was made with A child's year cricut cartridge at 3.5 inches. The card base is 6.5 x 5. The glitter paper is 6.25 x 4.75. I used stickles on her wings. I put a gem in the star on her wand. I used Cardz TV "Make a wish" stamp set for the sentiment.
I am entering this to the following challenges:
Brown Sugar Challenge Blog Ch #41
Speedy Fox and Friends Ch #159

Birthday bear

This bear came from Teddy bear cricut lite cartridge at 3.25. I added a gem to her bow and dress. The sentiment mat came from elegant edges plus the shadow at 2 inches. My white card base is 6.5 x 5. The patterned piece is 6 x 4.5. I stamped the sentiment with Cardz TV "Beary sweet" stamp set. The bear is on an action wobble.
I am entering this to the following challenge:
Action Wobbles Ch #53 Anything goes

Things with wings

This card was made with create a critter cricut cartridge at 3.25 inches. My card base is 6.5 x 5. The purple mat is 6.25 x 4.75. The flower mat is 6 x 4.5.  I added stickles to the wings. I stamped happy birthday on cardstock and cut it to fit then notched the ends. I popped up the sentiment and only the middle of the butterfly. I left the wings free.
I am entering this to the following challenge:
Simon Says Things with wings

Mothers day vase

This mother's day vase came from the Bloom cricut cartridge at 5 inches. I put cloth flowers on top of the paper cut ones and added buttons to each. I used a self adhesive bow. My card base is 6.5 x 5. The patterned paper is 6 x 4.5. I stamped the sentiment on white paper then cut it to fit. I popped up the vase and flowers on pop dots. I inked around the vase.
I am entering this to the following challenges:
Celebrate the Occasion Ch #111
Scrappy Moms Mother's day

Hop to me

This frog and lily pad came from create a critter cricut cartridge at 3.5. I added google eyes and put a heart on his belly as he was saying hopping you'll be mine so I thought he should have a heart. I inked around the frog and lily pad in green and the water in blue. My white card base is 6.5 x 5 the dark blue mat is 6.25 x 4.75 and the patterned mat is 6 x 4.5. For the water it is 6.25 x 2.5. I then stamped it with Cardz TV "critter captions" stamp set.
I am entering this to the following challenges:
Pause Dream Enjoy Ch #9 Outdoor critters
Craftin Desert Diva's Pun Linky Party

Beary mothers day

This card was made with the cricut Teddy bear parade cartridge at 3.25. My colors are pink green and white with a little yellow in it. I put liquid pearls on the sentiment and in her hat. My card base is 6.5 x 5. The green mat is 6.25 x 4.75. The paisley mat is 6 x 4.5. The border is 4.75 x 2. The white border is 4.5 x 1.5. I then used my punch to punch both top and bottom.
I am entering this to the following challenges:
HIMCR Ch #96
Exploring cricut Mothers day challenge
My craft spot #96 For Mom
BBTB2 Mother's day
Fantabulous #159

Craft show

This is my second craft fair.  This craft fair had a low attendance but I met a lot of nice people and had fun. Hoping to do more this fall. 

Another beary birthday

I have made a few of these but this time using different colors. I just love Teddy bear parade. She was cut at 3.25 inches. I added yellow stickles to her flower and lei. I put her on an action wobble. I also gave her google eyes. My card base is 6.5 x 5. The red mat is 6.25 x 4.75. The patterned paper is 6 x 4.5. The red border is 4.75 x 1.5. The white border is 4.5 x 1. I stamped it from Cardz TV "Beary Sweet" stamp set. I then added buttons.
I am entering this to the following challenge:
Action Wobble Ch #52

Berry sweet

I made this card with Simply Charmed cricut cartridge at 3.5 inches. My card base is 6.5 x 5 the green mat is 6.25 x 4.75 and the strawberry paper is 6 x 4.5. The cartridge shows a bowl with a face on it. I just used the bowl from layer 2. It also cuts a bunch of white dots to put on the strawberries but they were so small so I used my white gel pen. The sentiment came from Cardz TV "Garden Greetings" stamp set.
I am entering this to the following challenge:
Simon Says Happy Mail

Mothers daffodils

This card was made from spring cottage cricut cartridge at 4 inches. The card base is 6.5 x 5. The green mat is 6.25 x 5. The white mat is 6 x 4.5. I embossed this piece with the cuttlebug. I put green ribbon on it then stamped happy mothers day, notched the ends and added it to the ribbon. I also inked around the yellow of the daffodils.
I am entering this to the following challenges:
Fantabulous Challenge #158 Paper  Roses
Brown Sugar Ch#40 Mother's day
Paper Playtime Ch #9 Emboss
Go Fish Ch #40 Mom
Cardz TV Ch #29 There's no other like my mother

Fantabulous Challenge blog #158 paper roses

Wedding day

This card was made with elegant edges and wild card cartridges. The bride and groom were cut from wild card at 8 inches. The center mat was made with elegant edges at 5 inches. My white card base is 6.5 x 5. The black mat was cut at 6 x 4.5. I used the cuttlebug to emboss the center piece with the swiss dots folder. I then added pearls.
I am entering this to the following challenge:
BBTB2-Wedding bells are ringing

Main squeeze

I made a card similar to this yesterday but then realized it had white in it. The challenge I was doing this for you cannot used neutral colors so I made this one. I used Just because cartridge. I made the card from page 46 and cut it at 6.5. The scallop edge was also at 6.5. The oval middle in light green at 5.5 from page 30. The patterned oval was cut at 5.25. The lemon was cut at 4 inches on page 73.
I am entering this to the following challenge:
Just A Scrappin Ch #50