My prince

This card was made with Teddy bear parade at 3.25 inches with all his parts. My white card base is 6.5 x 5. The brown mat is 6.25 x 4.75. The yellow mat is 6 x4.5. The brown border is 4.75 x 1.5.  The yellow border is 4.5 x 1. I added brads to either side. I then stamped it happy birthday. I added a gem to his crown.
I am entering this to the following challenge:
HIMCR #9 Free style

Present card

This is a quick and simple card. My white card base is 6.5 x 5. The green piece is also 6.5 x 5. I ran it through the embossing folder swiss dots. Before adhering this piece I put ribbon on and tied a bow. I used birthday bash for the tag at 2 inches. I then stamped the tag.
I am entering this to the following challenges:
Go Fish Ch #37 Ribbon
Die Cuttin Divas #108 Embossing with ribbon

Spring

This card was made from just because cartridge. The tree was cut at 8 inches. The white card base is 6.5 x 5. The blue mat is 6.25 x 4.75. The cloud paper is 6 x 4.5. The grass came from paper doll dress up cut twice at 3.5. The sun came from life is a beach at 1.5. The flowers came from my flower punch and I added buttons. The quote came from a book of quotes and I liked this quote. This was printed from my computer.
I am enterinhg this to the following challenges:
Cardz TV Challenge #128 Don't quote me 
My Sheri Crafts #107 Spring has sprung

Happy mother's day

This card was made with Nursery rhymes cartridge. This is little miss muffett but since this is a mother's day card, I cut off the spider. She was cut at 3.5 inches. My white card base is 6.5 x 5. The dark blue mat is 6.25 x 4.75. The patterned mat is 6 x 4.5. The blue border is 4.75 x 1.5. The pink border is 4.5 x 1. I added gems to the sentiment.

Congrats

This card was made for someone who just bought a new car. The car came from just because cartridge at 3.5 inches. The road and the girl is from everyday papers dolls.  The girl at 3 inches and the road 6.25 fit to length. I put a gem in the girl's bow. My white card base is 6.5 x 5. The cloud paper is 6.25 x 4.75. The green mat is 6.25 x 2

Buzzing by

This card was made with Teddy bear parade at 3.25 inches. I put a small button in the flower. I put him on an action wobble. The card base is 6.5 x 5. The black mat is 6.25 x 4.75. The yellow mat is 6 x 4.5 and the patterned mat is 5.75 x 4.25. The black border is 4.75 x 1.5 and the yellow border is 4.5 x 1. I used Mary's from Cardz TV stamp set "Going Buggy"  I added two yellow buttons.
I am entering this to the following challenges:
Paper Playtime Ch #6 Use a Bee
Pause Dream Enjoy #6 Anything Goes
Simon Says Anything Goes

Anniversary

There is only one cut from the cricut on this card. That is the sentiment. This was cut from elegant edges at 2.5 inches which includes the shadow. The card base is 6.5 x 5. The black mat is 6.25 x 4.75. The polka dot mat is 6 x 4.5. The black border down the middle is 6 x 2.5. The patterned piece is 6 x 2.25. I put a black ribbon down the middle then tied a piece in a knot and attached it with a glue dot. I stamped happy anniversary. I used my heart punch and attached them to the sentiment.
I am entering this to the following challenge:
HIMCR #90

Easter bunny

This card was made with several carts. The bunny was from Doodlecharms at 2 inches. The eggs and basket also from Doodlecharms at 3.5 inches. The happy Easter was from create a critter 2 at 1.5 inches. The grass was from paper doll dress up 6.25 fit to length. My card base is 6.5 x 5. The blue mat is 6.25 x 4.75.
I am entering this to the following challenges:
Exploring Cricut
Fantabulous  #154

Easter chick

This card was made with create a critter 2 at 3.5 inches. I also used elegant edges for the middle piece. I used the cuttlebug on this piece with the swiss dots folder.

Chick

This card was made with Simply Charmed at 3.5 inches. The grass came from paper doll dress up fit to length at 6.25 then cut to fit. The happy easter came from Create a critter 2 at 2 inches.

Bunny and carrot

This card was made with simply charmed at 3.5 inches . The white card base is 6.5 x 5 and each layer is 1/4 inch less. The border is 4.5 x 2. I then punched the bottom and added buttons.

Bunny bear

This card was made from teddy bear parade at 3.25 inches. My white card base is 6.5 x 5. The dark blue mat is 6.25 x 4.75. The patterned mat is 6 x 4.5. My sentiment is on something from my scraps. I have no idea where it came from. The bear is on an action wobble.
I am entering this to the following challenge:
Action Wobble Ch #46

Chocolate bunny

This card was made with create a critter 2 at 3.5 inches on page 42. The basket is found on page 40 at 2 inches. The happy easter is on page 42 under phrase at 2 inches.
I am entering this to the following challenge:
Speedy Fox and friends Ch #152

Easter 4

This card was made from a child's year at 4 inches. My card base is 6.5 x 5. All the other mats were cut 1/4 inch less. The grass came from paper doll dress up at 6.25 fit to length.

Easter 3

This card was made with a child's year at 4 inches. My card base is 6.5 x 5. All the other mats were cut at 1/4 less. The grass came from paper doll dress up at 6.25 fit to length.

Easter 2

This card was made with a child's year at 4 inches. My card base is 6.5 x 5. All the other mats are 1/4 inch less. The grass came from paper doll dress up cut fit to length at 6.25.

Easter

This card was made with a child's year at 3.5 inches along with the shadow. My card base is 6.5 x 5. All the other mats are 1/4 inch less.

Easter bear

This card was made from Teddy bear parade at 3.25 inches. I added pearls to the bow on the bunny and the bow on the basket. My white card base is 6.5 x 5. The pink mat is 6.25 x 4.75. The patterned mat is 6 x 4.5. I used a fence from paper doll dress up. Not sure on the size as it came from my scraps.
I am entering this to the following challenges:
My Sheri Crafts Ch #106 Easter
Simon Says Stamp Challenge Easter/Spring

Hop to it

This card was made with Stretch your imagination and create a critter.  I started out with a white card base 6.5 x 5. The yellow mat is 6.25 x 4.75. The blue mat is 6 x 4.5 and the patterned mat is 5.75 x 4.25. The green border is 4.25 x 1.75. I ran that through the cuttlebug swirls folder. The bunny was from stretch your imagination page 67 at 4.25. I added a google eye, used my hole punch for his nose and used pink chalk for his ears. From create a critter on page 26 I cut the flowers and put tiny buttons in the middle. I used the cuttlebug again on the red egg using swiss dots folder.
I am entering this to the following challenges:
Die Cuttin Divas Ch #107 Use a bunny
Craftin Desert Divas

Birthday cake

This card was made from Birthday bash and elegant edges. It starts with my white card base at 6.5 x 5. The patterned mat is 6.25 x 4.75. The green mat is 6 x 4.5. The middle pieces were made from elegant edges at 4.5 inches for both. I embossed the green piece with the cuttlebug happy birthday folder. The cake was made from Birthday bash at 3.5 inches. I used stickles on the confetti. I then stamped Happy Birthday with cardz TV's make a wish stamp set.
I am entering this to the following challenge:
My craft spot #9

Springtime

I made this card from a child's year at 4 inches. I started out with a white card base 6.5 x 5. The gray mat is 6.25 x 4.75. The patterned mat is 6 x 4.5. The gray border is 4.75 x 1.5 and the patterned border is 4.5 x 1. I put ribbon around the border with a tie, put brading cord in the button, tied it in a knot and used a glue dot to attach it. I then stamped it. 
I am entering this to the following challenge:
Fantabulous Ch#153

Easter eggs

This easter card was made from Doodlecharms and  paper doll dress up. My white card base is 6.5 x 5. The purple mat is 6.25 x 4.75. The eggs and basket is from Doodlecharms at 3.5 inches. The grass is from paper doll dress up cut fit to length at 6.25 inches.
I am entering this to the following challenge:
BBTB2 Egg-ceptional Easter

Egg hunt

This card was made from create a critter 2. The bunnies were cut at 2.5 inches. They are on action wobbles. I had to cut the wobbles quite a bit to fit. The basket was cut at 2.75. The phrase at 2.25. My white card base is 6.5 x 5. The brown mat is 6.25 x 4.75 and the patterned paper is 6 x 4.5. On the inside are six different colored eggs at the bottom.
I am entering this to the following challenge:
Action wobble Ch #45

St Patrick clover

This was a simple card.The clover was cut from a child's year at 4 inches. My white card base is 6.5 x 5. The black mat is 6.25 x 4.75. The clover paper is 6 x 4.5. I used elegant edges for the middle piece and shadow. I put 4 green brads in all four corners. I used my cuttlebug and embossed the white middle piece and inked around the edges. I stuck a sticker in the middle of the clover.
I am entering this to the following challenges:
Scrappy Moms Luck of the Irish
Just a Scrappin #44
Cardz TV Erin go braugh

Baby bear

This bear was made with Teddy bear parade at 3.25 inches. I added a gem to the flower in her hat. The white card base is 6.5 x 5. The blue mat is 6.25 x 4.75. The patterned mat is 6 x 4.5. The blue border is 4.75 x 1.5 and the white piece is 4.5 x 1. I stamped it with Cardz TV "Beary Sweet" stamo set. I added two pink buttons.
I am entering this to the following challenge:
My craft spot Ch #90

Easter bunny

This card was made with 2 cartridges. I started off with a white card base at 6.5 x 5. The blue layer 6.25 x 4.75. The pink mat is 6 x 4.5. The patterned mat is 5.75 x 4.25. The bunny is from Doodlecharms at 2.5 inches. I used a black pen to mark his eyes, mouth and whiskers. The fence and grass came from paper doll dress up. The fence was cut at 1.75 and also on blackout feature at the same size and glued together. The grass is on the same page cut at 1 inch. I put the fence and grass on the patterned mat and the pink mat before adhering it to the blue mat and card base so you can cut off the ends that stick out. I used my flower punch and cut 3 flowers and put small buttons in the middle. The bunny was tucked in behind the fence. I used my circle punch to make the bunny's paws on the fence. I also used pink chalk for his ears.
I am entering this to the following challenge:
BBTB2 Bring on the bunnies

Springtime

This card was made from a child's year at 3.5 inches. I started with a white card base at 6.5 x 5. Then I added a black mat at 6.25 x 4.75. The patterned mat is 6 x 4.5. The border at the bottom is 4.5 x 1.5. I then added a ribbon. The sentiment came from create a critter 2 at 1 inch.
I am entering this to the following challenge:
Twisted Tu5esday 2TC45

Golfer bear

This card is for a golfer. The bear, all his parts and the putting green all came from create a critter 2 at 3.25 inches. The card base is 6.5 x 5. The cloud paper is 6.25 x 4.75. The grass paper is 6.25 x 2.

For the boys

This dinosaur came from create a critter at 3.5 inches. My white card base is 6.5 x 5. The orange mat is 6.25 x 4.75. The patterned paper is 6 x 4.5. I used elegant edges to put the sentiment on at 2 inches. I added 3 orange buttons.
I am entering this to the following challenge:
Pause Dream Enjoy Ch #5

St.Patrick's day bear

I made this bear with Teddy bear parade at 3.25 inches along with all his parts. I put yellow stickles for his gold in the pot and on his hat buckle. My white card base is 6.5 x 5. The green mat is 6.25 x 4.75. The clover paper is 6 x 4.5. I used elegant edges to put him on. I inked around the edge with Tim Holtz peeled paint distress ink. Then I added a sticker.
I am entering this to the following challenges:
Red Carpet studios #27 Leprechaun
Exploring Cricut The luck of the Irish
Die Cuttin Divas #106

Inspire

I made this card with A child's year at 3.25 inches along with the shadow. I used elegant edges for the background mat at 4.25 and inked around the edges with Tim Holz faded jeans distressed ink. The white card base is 6.5 x 5. The dark blue mat is 6.25 x 4.75 and the patterned paper is 6 x 4.5. I added buttons in the 4 corners.
I am entering this to the following challenges:
My Sheri crafts Ch 105 Read
Cardz TV Ch #26

Good luck worm

This card was made with create a critter 2 at 3.5 inches. My white card base is 6.5 x 5. The green mat is 6.25 x 4.75. The patterned paper is 6 x 4.5. I put a pearl on his tie and stickles on the buckle on his hat. I used elegant edges at 3 inches for the sentiment. I inked around the sentiment, added 2 buttons and colored the clovers.
I am entering this to the following challenge:
Challenges 4 Everybody Ch#15 Anything goes

Snail

I made this card for a friend who's sister who likes snails. I cut the snail with create a critter at 3.5 inches. The white card base is 6.5 x 5. The blue mat is 6.25 x 4.75. The patterned paper is 6 x 4.5. I added jewels to the snail and the side.
I am entering this to the following challenge:
Paper Playtime Ch #5 Anything goes

Make a wish

This card was made with 3 cartridges. The pot of gold was made with Simply charmed at 3.5 inches. I put yellow stickles on the gold. The sun was made with Life is a beach at 2 inches. The clouds were made from create a critter 2. I added rain drops with some stickers I had. The card base is 6.5 x 5. The green mat is 6.25 x 4.75. The blue is 6 x 4.5 and the green is 4.5 x 2.
I am entering this to the following challenge:
Go Fish #36 Gold

Paddy bear

I made this card with Teddy bear parade and elegant edges. The bear was from Teddy bear parade at 3.25 inches. I put stickles on his buckle on his hat and the gold. I used a real button on his jacket. I used two stickers on the corners. The middle pieces were cut from elegant edges at 5 inches for both the white piece and shadow. My white card base is 6.5 x 5. The green mat is 4.75 x 6.25. I rounded the corners. Then I cut 3 pieces of the clover paper at 4.5 x 1.75, rounded the corners and spaced them evenly.
I am entering this to the following challenges:
Craftin Desert Divas
Die cuttin divas Challenge #105 Try a sketch
Simon says A bit O green

Birthday bird

I made this card with Noahs ABC's at 4 inches. My white card base is 6.5 x 5. The brown mat is 6.25 x 4.75. The patterned mat is 6 x 4.5. I used elegant edges to put the sentiment on. I used both the shadow and the base. I inked the edges of the white piece. The stamp is from Cardz TV for the birds stamp set.
I am entering this to the following challenge:
Fantabulous challenge #151 Bye bye birdie

Good luck

This card was made from several cartridges. For the tie and shirt I used simply charmed at 3 inches. For the ovals pieces I used elegant edges at 4 inches for both the oval and the shadow. For the clovers I used A child's year at 1 inch. My white card base is 6.5 x 5. The green mat is 6.25 x 4.75. The clover mat is 6 x 4.5. The sentiment mat and shadow is also from elegant edges. I used real buttons on the shirt. The collar and the top of the tie were popped up
I am entering this to the following challenges:
HIMCR Ch #87 Greens
BBTB2 So lucky shamrock challenge

Panda bear

This panda was made with Noah's ABC's at 3.5 inches. You can find him on page 51. The white card base is 6.5 x 5. The green mat is 6.25 x 4.75. The rainbow paper is 6 x. 4.5. The grass border is 6 x 2. I used my label punch for the sentiment.
I am entering this to the following challenge:
Just A Scrappin' Ch #42 Teddy bears

Birthday frog

This frog was made from Noah's ABC's at 3.5 inches. The butterfly was from everyday paper dolls found on page 30 cut at four inches. I popped it up and bent the wings. I used a black gel pen to put the path he was flying. My white card base is 6.5 x 5. All the other layers are 1/4 inch less. The border is 6 x 1 1/2. I stamped Happy birthday on the outside and added 2 buttons.
I am entering this to the following challenge:
Simon says challenge Anything goes

Birthday girl

I made this birthday girl with Teddy bear parade at 3.25 inches. I put yellow stickles on her hat and cupcake. I ran her outfit through the cuttlebug swiss dots folder along with the hat. My card base is 6.5 x 5. The pink mat is 6.25 x 4.75. The patterned mat is 6 x 4.5. The border is 4.75 x 1.5 then I punched it with my scallop punch. I then ran a ribbon across it.
I am entering this to the followings:
Celebrate the Occasion Ch #101
Cardz TV Ch#126 Make a Wish

Leprechaun

This card was made with paper doll dressup. The leprechaun was cut at 3.5 inches.I used peachy keen stamp for his face. I used pink chalk for his cheeks. I put stitching around his clothes and hat. I used real buttons on his jacket. I used yellow stickles on his buckle on his hat, shoes and the gold in the pot. The sentiment is small but it reads "never iron a shamrock, you don't want to press your luck"
My white card base is 6.5 x 5 and the rest is 1/4 inch less.
I am entering this to the following challenge:
Fantabulous #150 "Fun with puns"