Wedding

This is a wedding card made with paper doll teen scene at 4 inches. My card base is 6.5 x 5. The black mat is 6.25 x 4.75. The patterned paper is 6x4.5. The earrings that cut for the girl was too small. I put silver stickles on the veil. I also put a dot on her finger to look like a diamond.
I am entering this to the following challenge:
Red Carpet Studio #25http://redcarpetstudiochallenge.blogspot.com/2013/02/rcs-25-wedding-singer.html

NH state animal

The challenge I did this for asked you to make something about your state. NH's state animal is the white tailed deer. My card base is 6.5 x 5. The green mat is 6.25 x 4.75. The blue mat is 6 x 4.5. The border is 4.75 x 2. The deer came from create a critter at 3.5 inches. I cut the flowers on the same page at 2.5 inches. The sun is from life is a beach at 1.5 inches.
I am entering this to the following challenge:
Speedy Fox and friends ch #148

Fishing bear

This card was made with Teddy bear parade cartridge at 3.25 inches. The fish was from everyday paper dolls, same size. The sentiment mat was from elegant edges at 2 inches. The sentiment was from Cardz TV beary sweet stamp set.
I am entering this to the following challenge:
My Sheri Crafts Ch #104

Birthday kitty

I made this card with create a critter 2. The kitty and all her parts were cut at 3.5 inches. You can find her on page 60. My card base is 5 x 6.5. The dark blue mat is 6.25 x 4.75 and the patterned paper is 6 x 4.5. The border is 4.75 x 1.5 and the patterned border is 4.5 x 1. I added ribbon and a button. The sentiment was punched from my label punch. I added buttons to this as well. To the kitty I added gems and used stickles on her crown. I popped her up.
I am entering this into the following challenges;
Just a scrappin
Exploring Cricut

Luck of the Irish

This card was made with Simply Charmed cricut cartridge. The card base is 6.5 x 5. The dark green mat is 6.25 x 4.75. The clover paper is 6. X 4.5. The leprechaun was cut at 3.5 inches along with all his parts. The cauldron and gold was cut from the next page also at 3.5 inches. I then added a sticker. I popped up the leprechaun and the cauldron on pop dots. I have added stickles to all the yellow pieces .
Iam entering this to the following challenges:
My craft spot Ch#8
Cardz TV #25 Luck of the Irish
Candied Cards #25 Luck of the Irish
Purple Monkey Luck of the Irish

Love bear

This card was made with Teddy bear parade cartridge at 3.25 inches. My white card base is 6.5 x 5. The red mat is 6.25 x 4.75. The heart paper is 6 x 4.5. The bear and all the parts are at 3.25 inches. For the sentiment I used elegant edges on page 22. I used the oblong for the white and shadow for the red. I then stamped the sentiment.
I am entering this to the following challenge:
Simon Says Stamp Challenge Use an arrow

Keep on swimming

This card was made with Life is a beach at 4 inches. You can find him on page 51. The layers I had to cut several times to get different colors. My card base is white measuring 6.5 x 5. The water paper is 6.25 x 4.75. I added a sentiment. The swimmer is on an action wobble which was very difficult as the guy is skinny. I got on on with a little bit showing.
I am entering this into the following challenge:
Action Wobble Ch #43

Spring

This card was made with A child's year at 4 inches. The card base is white measuring 6.5 x 5. The blue mat is 6.25 x 4.75. The patterned paper is 6x 4.5. The border is 4.75 x 1 1/2. I added gems. Both the image and the shadow were cut at 4 inches. I popped up the image. I then stamped the sentiment.
I am entering this to the following challenge:
My Craft Spot Ch #87

Love birds

This anniversary card was made with 3 carts. The birds were cut from create a critter at 1 inch. I put the boy bird on flip to face the girl bird. The tree was from create a critter 2 at 4 inches. The fence came from paper doll dress up at 1 1/2 inches. The white card base is 6.5 x 5, the cloud paper is 6.25 x 4.75 and the grass paper is 4.75 x 2. I stamped the sentiment on white paper then cut it out. Then I cut notches.
I am entering this into the following challenge:
Celebrate the occasion Ch #100

Kiss the cook

I made this card for a challenge called kiss the cook and you had to include a recipe. My cook was made with Teddy bear parade at 3.25 inches. My white card base is 6.5 x 5. The red mat is 6.25 x 4.75. The bottom piece is 4.75 x 2. I added ribbon. My recipe is called love and the ingredients are you and me. The font was cut from life is a beach at 3/4 inch.
I am entering this to the following challenge:
Fantabulos Cricut challenge #149

Valentine bear.

I made this card with create a critter 2. You can find him on page 33 and cut at 3.5 inches. My white card base is 6.5 x 5. The red mat is 6.25 x 4.75 and the patterned mat is 6 x 4.5. For the oval piece and its shadow I used elegant edges at 5 inches. I used the cuttlebug to emboss the white piece. I then added 4 red heart buttons.
I am entering this into the following challenges:
Candied Cards #125 critter cuties
Purple Monkeys critters cuties
Cardz TV #125 critter cuties

Birthday blessings

I made this card with create a critter 2 on page 33 at 3.5 inches. My card base is 6.5 x 5. The purple mat is 6.25 x 4.75 and the flower mat is 6 x 4.5. I used elegant edges for the oval and shadow at 5 inches. I put stickles on the cupcake bottom and tied ribbon. I added buttons in the corners and stamped it.
I am entering this to the following challenge:
BBTB2 Amethyst color color birthday cake or cupcake

Lions roar

This card was made from Noah's ABC'S. The lion was cut at 3 1/2. The sentiment was stamped from Cardz TV critter stamp set. I used elegant edges for the sentiment and shadow at 2 inches. My white card base is 6.5 x 5. The scenery was cut at 6.25 x 4.75.

Happy mouse

This mouse was made with create a critter at 3.5 inches. You can find him on page 37. I used brown instead of grey. I used elegant edges for the oval and shadow at 5 inches. I popped up the mouse. My white card base is 6.5 x 5. The pink mat is 6.25 x 4.75. The patterned paper is 6 x 4.5. I then stamped you're the best.
I am entering this to the following challenge:
Speedy Fox and Friends Ch #147

Leprechaun bear

This bear was made with Teddy bear parade at 3.25 along with all his parts. My card base is 6.5 x 5. The green mat is 6.25 x 4.75 and the clover paper is 6 x 4.5. The oval piece came from elegant edges at 5 inches. I then embosses it with the cuttlebug. Not sure the name of the folder. I added a St Patrick's Day sticker. I used yellow stickles for his buckle on his hat and the gold in the pot of gold.
I am entering this in the following challenge:
HIMCR #85 Emboss it

St. Patrick turtle

This turtle was made from create a critter 2 at 3 inches popped up. My white card base is 6.5 x 5. The black mat is 6.25 x 4.75. The pink mat is 6 x 4.5. The patterned mat is 5.75 x 4.25. The black border is 1.5 x 4.5. The pink border is 1 x 4.25. I added 2 pink buttons on the border. The clovers were cut from A child's year at 1.5 and they are popped up. I put yellow stickles on the turtles buckle.
I am entering this to the following challenges:
Challenges 4 Everybody Ch #14 Anything goes
Paper Playtime #4
Pause Dream Enjoy Ch #4

Make a wish

This card was made from A child's year at 4 inches. I took my 6.5 x 5 white card and used chalk at all different colors and randomly made circles. I added stickles to the wings and star. I added the sentiment.
I am entering this to the following challenge:
Allsorts challenge week 194

Thank you

This card was made with storybook. The card base is 6.5 x 5. The blue mat is 6.25 x 4.75. The brown mat is 6 x 4.25. The flowered piece is 2.5 x 4.25. The polka dot border is 1 x 4.25. I put ribbon on the border with a bow. On the storybook cartridge I cut an oval from page 69. You hit shift fancy/corner at 4 inches. Then you come down to shift/shadow and cut  white piece at 3.25 and the brown piece at 3.5. You put the white on brown and onto the blue scallop. Then stamp your sentiment. I put 3 gems on the side or you can use pearls.

Owl love

This owl came from create a critter 2 at 3 1/2 inches. My card base is 6.5 x 5. The pink mat is 6.25 x 4.75. The patterned mat is 6 x 4.5. The border is 4.75 x 1.5 and the top piece is 4.5 x 1. I added some bling and stamped it.
I am entering this to the following challenge:
Just A Scrappin Valentines Day

Love hearts

I used doodlecharms for this card. The scalloped heart was cut at 4.25 and the inside heart was at 4 inches. I inked around them both with Tim Holtz fire brick distress ink. Both hearts are popped up. I then added 3 rhinestones. The card base is 6.5 x 5. I then stamped it with the love stamp.
I am entering this into the following challenge:
Simon Says Stamp Challenge White on white

Love

This card was made with a digital stamp. The card base is 6.5 x 5. The background paper is 6 x 4.5. I stamped love. I put the image on an action wobble.
I am entering this to the following challenge:
Action Wobbles #42 Stamp it

Love you

This card was made from create a critter 2 at 3.5 inches. The sentiment was cut from life is a beach at 3/4 of an inch. My card base is a white card at 6.5 x 5. The black mat is 6.25 x 4.75. The heart paper is 6 x 4.5
I am entering this to the following challenge:
For Fun Challenge An arrow

Mothers day

A friend of mine asked for a mothers day card. Says her mother likes frogs and butterflies so I thought I would do both. My card base is 6.5 x 5. The green mat is 6.25 x 4.75. The butterfly paper is 6 x 4.5. The border is 6 x 2. I made the frog from create a critter 2 at 3.5 inches along with the cat tail. I stamped a blank white paper and hand cut to fit then cut notches on the ends. I then added 2 pink buttons.

The early bird

This card was made with create a critter 2 at 3 1/2 inches. Instead of the ribbon it cuts for the hat, I used my flower punch and punched our a flower and put a gem in her hat. I used elegant edges on page 25 oblong feature at 5 inches for the center piece. I then ran it through the cuttlebug swiss dots folder. My card base is 6 1/2 x 5. The purple mat is 6 1/4 x 4 3/4. The patterned mat is 6 x 4 1/2. I then stamped with Cardz TV for the birds stamp set.
I am entering this into the following challenge:
Die Cuttin Divas Ch #102 Color

Kids valentine

These cards were made from create a critter 2. They were all cut at 1 3/4 inches. The cards were made with elegant edges at 3 inches. The heart paper was cut at 2.5 x 2.5. On the back I stamped Happy Valentine's Day and to and from.
I am entering these to the following challenge:
Cardz TV Kidz Kardz challenge #24

Wheelbarrow full of hearts

This was a simple card made with Walk in my garden. The wheelbarrow is found on page 107 and is cut at 2 inches. I used my heart punch and punched a whole bunch of hearts. I glued them in the wheelbarrow and down the outside. I added a ribbon between the two papers. The card base is 6.5 x 5. The green mat is 6.25 x 4.75. The blue paper is 6 x 4.5. The green paper is 2 x 6. I then stamped happy valentine day and added two more hearts.
I am entering this to the following challenges:
RCS #23
Exploring Cricut Be my Valentine
BBTB2 Love is in the air
Fantabulous Cricut #148
My Craft Spot Ch 86

Anniversary

This card was made with paper doll teen scene at 4 inches. The girl on page 29 and the boy on page 69. The card base is 6.5 x 5. The grey layer at 6.25 x 4.75. The patterned paper at 6 x 4.5. I added a border and punched some hearts to put on it. I also put one between the people.
I am entering this to the following challenge:
Twisted Tuesday 2TC43

Love bug

This bug was made from simply charmed on page 31 at 3 inches. My card base is 6.5 x 5. The red mat is 6.25 x 4.75 and the heart paper is 6 x 4.5. The border is 1.5 x 4.5 the red border on top is 1.5 x 4.25 then I punched it with my scalloped border punch. I added two buttons and stamped the sentiment.
I am entering this to the following challenges:
Allsorts challenge blog week 193
Challenges 4 everybody challenge #13
Mark's finest papers challenge 146
Paper playtime challenge #3

Doggone good

This dog was made from doodlecharms at 4 inches. I used red for the shadow then realized the whiskers would be red. I should have done a black blackout before putting it on the shadow. So I took my black gel pen and colored the whiskers. The eyes would have been red also but I used google eyes on him. I also used the black pen on the cut for his mouth.
The sentiment came from just because cartridge cut at 5 inches.
My white card base is 6.5 x 5. The red mat is 6.25 x 4.75 and the patterned mat is 6 x 4.5 I put the dog on an action wobble.
I am entering this to the following challenge:
Action wobbles Ch#41

Love owl

This owl was made with create a critter 2 at 3 inches. I added two heart stickers to her wings. The branch was from create a critter cut fit to length at 3.5. The leaves were cut at 1 3/4. My white card base is 6.5 x 5. The pink mat is 6.25 x 4.75. The stripped mat is 6 x 4.5. The sentiment mat is from elegant edges at 2 inches. The sentiment is from Michael's.
I am entering this to the following challenge:
Simon Says challenge have a heart

Monkey love

This card was made with create a critter 2 and elegant edges. The monkey and vine can be found in create a critter 2 on page 34. I cut both at 3.5. My card base is 6.5 x 5. The heart paper in 6.25 x 4.75. The oval piece was cut from elegant edges at 5 inches. I put the heart ribbon on the heart paper  before I adhered it to the card base. I also added 2 red buttons to the top. I stamped hugs at the bottom.
I am entering this into the following challenge:
Die Cuttin Divas Ch #101 Sketch
Just a Scrappin Love is in the air 

Truck full of hearts

This card was made from just because cartridge. The truck was cut at 6 inches. You can find it on page 42. I took my heart punch and punched out a bunch of pink and red hearts. I glued them to the back side of the truck to make it look like the pickup bed was full of hearts. For the banner, I stamped the sentiment on a plain piece of paper then cut it to fit. I put notches on the ends. I added two heart buttons.
I am entering this to the following challenges:
HIMCR #83
Pause dream enjoy Ch #3

Koala bear valentine

This card was made with create a critter 2 at 4 inches. I used stickles on the bow and around the heart. I put a heart sticker in the heart. The card base is 6.5 x 5. The next mat is 6.25 x 4.75 and last one is 6 x 4.5. I added ribbon with bow and popped it up.
I am entering this toi the following challenge:
My craft spot Ch 85

Spring mothers day card

I know, its very early but I had several requests for some mothers day cards. This I made with the Bloom cartridge. The  fence I cut 3 times at 2 1/4 inches. I also cut the leaves and flowers at the same size. The frame was cut at 3 1/4 inches with all its parts. It was the frame 3 cut. I stamped a white cardstock and cut it down to fit behind the frame. I used purple stickles on the middle of the flowers. My card base is 6.5 x 5. The purple mat is 6.25 x 4.75. The cloud paper is 6 x 4.5. The grass paper is 4.5 x 1 3/4. I used a green ribbon between the sky and grass.
I am entering this into the following challenge:
BBTB2 Spring is in the air

Valentine

My white card base is from birthday bash cut at 5.5. The pink mat is cut from the same cart at 6 inches. The patterened mat was cut at 5.75. The sentiment piece was cut at 1 x 4. The hearts are from simply charmed cut at 2 inches. I added two heart buttons.
I am entering this in the following challenges:
Glitter and sparkle challenge 18
Fantabulous #147 Queen of Hearts
Cardz TV challenge #124
Go Fish #124

One hip chick

This chick came from Just because cartridge. I cut him at 6 inches. My card base is a white 6.5 x 5. The first mat is 6.25 x 4.75. The patterned mat is 6 x 4.5. I used elegant edges for the oval middle and its shadow at 4 inches.  I inked around the edges of the white oval. I stamped it with Cardz TV critter captions stamp set.
I am entering this to the following challenge:
Allsorts challenge week 192

Thankful

My white card base is 6.5 x 5. The black mat is 6.25 x 4.75. The patterned mat is 6 x 4.5. The black strip down the middle is 6 x 2.5 and the white strip is 6 x 2.25. I ran this piece through the cuttlebug. I added ribbon down the strip and added a bow. The sentiment is on a piece that I cut out with my circle punch. I then used elegant edges for the the shadow. I then added two gems.
I am entering this to the following challenge:
For fun challenge Thank you, Thank you

Tick tock

I used several different carts for this card. I started out with a white card base 6.5 x 5. Then I added a brown mat 6.25 x 4.75. The patterned mat is 6 x 4.5. The oval middle is from elegant edges at 5 inches. The clock came from nursery rhymes at 4 inches. I also cut the shadow at 4 inches. The font is from life is a beach.
I am entering this into the following challenge:
Fantabulous cricut challenge #146 Time flies

Popcicle

This card was made from doodlecharms on pg. 43 at 4 inches. My white card base is 6.5 x 5. The green mat is 6.25 x 4.75 and the patterned paper is 6 x 45. I cut a white piece of paper and put it behind the hole in the popsicle. I popped up the image I then stamped with Cardz TV Make a Wish stamp set.
I am entering this to the following challenge:
Pause dream enjoy Ch #2 Desserts